Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email:

KLB EP 740 E is a 2-component, water-emulsified, pigmented epoxy-resin seal.

EP 740 E is mainly used a seal on concrete, cement screeds, magnesia screeds and mastic asphalt, as well as for the renovation of existing surfaces as it has excellent adhesion to a wide range, including existing substrates.

The product is easy to apply by roller, has high coverage capacity and, due to its composition, is pleasant to use and environmentally friendly. In two coats, a durable and visu­ally appealing flooring seal can be produced.

Download Datasheet KLB EP740E 

KLB EP 216 Universal is a universal, solvent-free, pigmented 2-component multi purpose binder based on epoxy resin for hard industrial coatings. It is high-grade ad­justed and strongly pigmented. Because of its low viscosity the product is suitable for rolled coatings as well as a top-coat for scattered, grit coats.

The material is suitable for layers starting at 1.5 – 4.0 mm thickness for smooth coatings. The coating material may be filled with up to 0.7 parts by weight quartz sand (grain size 0.1/0.3 mm). Blending with quartz sand is both benefi­cial and economical, for thickness above 2 mm. The coa­ting material has excellent features in self levelling, easy application and smoothing.

Download Datasheet EP216 

KLB EP 282 WHG is a crack-bridging and solvent- free, 2-component epoxy resin free-flow coating with excellent chemical resistance.

The coating is suitable for use in collection bays and areas, such as in production / handling areas and storage / packing areas that must be equipped with approved coating systems.

The product will withstand forklift-truck traffic and has very good resistance to chemicals and is resistant to solvents, motor fuels, oils, mineral acids, alkalis and salts, etc.

Download Datasheet KLB EP282 WHG 

KLB EP 285 CR is a solvent-free, 2-component epoxy resin free-fl ow coating with increased chemical resistance. The hardened coating is suitable for use in commercial and industrial locations in which high chemical resistance is required. The range of uses extends to many industrial and commercial situations in which the resistance properties of the coating is foremost.

EP 285 CR is provided with good resistance to chemicals such as, e.g. alkalis, oils, grease, water, salt solutions and various acids. To ensure that the coating is suitable for your application, refer to the resistances chart and request advice.

Download Datasheet KLB EP285 CR 

Colours – 12 standard RAL colours