Clear Sealers

Each product carries a very brief description, with the Data Sheet giving detailed technical specification and guides on the use of the product and its application.

If you have questions on any product or need clarification on the uses or application, please call us on (01) 457 0868 or drop us an email:

KLB PU 800 E Satin is a high qua­lity, colourless, 2-component polyurethane seal-coat that is used as a matt finish on epoxy-resin and polyurethane coatings. PU 800 E is based on a new, environment pro­tective technology, represents an excellent alternative to solvent-based seal products and can be used in a wide range of areas. Application is by mohair- or velour- roller using cross-strokes. Due to its very low solvent content, no expensive protective measures are required. Due to its drying performance, very consistent and “beautiful” sur­faces can be produced.

Download Datasheet KLB PU 800 E Satin 

KLB EP 700 E Matt is a 2-component epoxy resin emulsion that can be thinned with water and contains only a very small quantity of solvent for reasons of quality improvement. EP 700 E is used as a matt top-coat seal on reaction resin coatings. It produces a uniform, silk-matt surface finish that gives the coating a consistent appearance as the “reflection effect” of gloss coatings from light dispersion is completely eliminated.

Download Datasheet KLB EP700 E Matt     

KLB EP 175 S is a high quality, 2-component epoxy resin preparation for clear seal-finishing on décor mortar and décor scatter coatings. EP 175 S is used for top-sealing colours and scatter-coatings for use in slip-resistant wet areas such as, e.g. kitchens, abattoirs, fish and food industries. For trowel applied surface sealing and smoothing of décor and terrazzo flooring.

Application as a filler-sealer is completed in several applications. The product has little inherent colour and, with careful application, gives a visually uniform and good appearance. As the product is based on epoxy resin, it is possible to use it in areas where there is a demand for mechanical and chemical resistance. Surfaces are abrasion and wear resistant, hygienic and easy to clean. EP 175 S has good colour stability.

Download Datasheet EP175S 

KLB PU 881 EL+ [E.S.D. – antistatic] is a solvent based, 2-componepolyurethane seal with a silk matt surface finish. PU 881 EL+ contains solvents but has a high solids content. The product is used for producing uniform, matt surfaces on electrically conductive industrial and commercial flooring. It is notable for its high covering power and uniform, streak-free application. The seal is always used in combination with conductive coatings, EP 200 EL+ or PU 413 EL+.

The hardened seal is suitable for use in commercial and industrial locations where an antistatic or electrically conductive flooring is required. Thanks to the special conductive filler, very consistent conductive flooring can be produced that is especially suitable for use in the electronics or electro-technical industries.

Download Datasheet KLB PU881EL 

Polyurethane Solvented – High Build – Very tough

FC Elastomer Kollerdur MO121 is a moisture-curing polyurethane resin based on Toluene diisocyanate. It is totally soluble and dilutable with xylene thereby eliminating the need to use expensive ester solvents. Kollerdur MO121/22%, a 22% NVC for immediate use. Kollerdur MO121/40% a 40% NVC for immediate use.

Download Datasheet FC Elastomer Kollerdur

Crystal Clear [Matt & Gloss] – Brickwork & Timber

CRYSTAL CLEAR is a single pack water based polyurethane dispersion with an acrylic mix. It is completely non hazardous and as such is suitable for application in both internal and external applications and in small confined areas as well as larger, more exposed areas.

CRYSTAL CLEAR will adhere to most substrates and form to give a high gloss film. Once fully cured CRYSTAL CLEAR is hard wearing and offers good chemical resistance against a large number of aggressive chemicals.

CRYSTAL CLEAR can be used on concrete, stone, brickwork, wood and most traditional building materials, as well as on aluminium, brass, copper bright work and some plastics.

Download Datasheet Crystal Clear